Anti-static wrist

Principle explanation
This type of wireless static elimination wristband uses the physical principle of [static voltage balance]. According to “electrostatic engineering”, static electricity uses the squeezing method between ions The principle of transfer is developed. With the feature of electrostatic pushing from high potential to low potential, the human body’s electrostatic ions are pushed into the body design <collection area>, through the [charge induction principle] will make the conductive plate positive The opposite surface has “equivalent charges of opposite sex”-[skin effect], because the built-in ion exchanger < use of its low free energy characteristics>, it can easily provide the introduced electrostatic ions and the same amount of opposite electricity. Neutralize, so it can achieve the effect of static discharge. In addition, there is a screw on the outside of the machine to connect with the internal conductor loop.
(1) It can be used as an instantaneous introduction of a large amount of electrostatic charge caused by improper contact of a high static power source. When the ion neutralization cannot be completed, it can be provided by screws and external air water molecules. Ion neutralization [is the Corona discharge effect, which effectively eliminates static electricity, and achieves the ultimate goal of [static voltage balance].
(2) This screw can be used for potential zeroing function (just touch the screw to the ground source).
(3) can be used as a loop detection terminal.

Special points
1. Convenience-Break through the space limitation and walk around freely, so that online operators are not tied by the grounding wire, improve work efficiency, and prevent inspectors or visitors from becoming The destroyer of static electricity.
2. Safety-As long as you regularly check whether the circuit of the main body is normal, you can use it with peace of mind. If there is no grounding wire type, please pay attention to whether the grounding is true or it is off.
3. It is economical-as long as it is used normally, the main body can last up to two years, while the wired type requires at least 3-6 months to replace the wrist strap or grounding wire, so the cost is More cost-effective.

Simple detection method
Test equipment: three-purpose electric meter & wristband tester